Contents of a purge_det.dat file

Below is an example of a purge_det.dat file.

For a straightforward run of purge_det on GEM data it is necessary to change the following...

1. The location of the .RAW data files, as given on the second line.
2. The run numbers (16280, 16281 etcetera in this example). 

The first run numbers given should be for the vanadium. Then all the run numbers for the experiment should be given, except those with low counts. Therefore runs on the empty instrument, short runs, and any other runs with low counts should be excluded from the list.

'GEM'
'c:\gem_data\'
'RAW'
''
6
30 4980
1 10
5 10
16280
16281
16282
16274
16275
16276
16277
16278
16279

Last updated on 05 Dec 2005 by Alex Hannon (a.c.hannon@rl.ac.uk)