Groups Files for GEM data
The following groups files are available for use when running NORM on GEM data.
These groups files are suitable for use with the gudrun data analysis software, as well as with the ATLAS software.
(a groups file can now be downloaded by clicking on its name)
Groups files | Suitable for these run numbers | Includes these detectors |
norm_par:banks_994.grp norm_par:sides_994.grp norm_par:mods_994.grp click here for full list of contents of each detector group |
74 - 1163 | Banks 2 and 5. Part of Bank 4. |
norm_par:banks_995.grp norm_par:sides_995.grp norm_par:mods_995.grp click here for full list of contents of each detector group |
1164 - 1463 | Banks 2 and 5. Parts of Banks 4, 6 and 7. |
norm_par:banks_001m.grp norm_par:sides_001m.grp norm_par:mods_001m.grp click here for full list of contents of each detector group |
3366 - 8504 | Banks 2, 5, 6 and 7. Part of Bank 4. |
norm_par:banks_013m.grp norm_par:sides_013m.grp norm_par:mods_013m.grp click here for full list of contents of each detector group |
8509 - 8753 | Banks 1, 2, 5, 6 and 7. Part of Bank 4. |
norm_par:banks_013xm.grp norm_par:sides_013xm.grp norm_par:mods_013xm.grp click here for full list of contents of each detector group |
8837 - 9382 | Banks 1, 2, 5, 6 and 7. Part of Bank 4. |
norm_par:banks_014m.grp norm_par:sides_014m.grp norm_par:mods_014m.grp click here for full list of contents of each detector group |
8754 - 8836 9383 - 10262 |
Banks 1, 2, 5, 6 and 7. Part of Bank 4. |
norm_par:b022.grp | 10263 - 10569 | Banks 1, 2, 4, 5, 6 and 7. Part of Bank 3. |
norm_par:banks_023m.grp norm_par:sides_023m.grp norm_par:mods_023m.grp click here for full list of contents of each detector group |
10586 - 11407 | Banks 1, 2, 4, 5, 6 and 7. Part of Bank 3. |
norm_par:banks_024m.grp norm_par:sides_024m.grp norm_par:mods_024m.grp click here for full list of contents of each detector group |
11408 - 15584 | Banks 1, 2, 3, 4, 5, 6 and 7. |
norm_par:banks_033am.grp norm_par:sides_033am.grp norm_par:mods_033am.grp click here for full list of contents of each detector group |
15585 - 15902 | Banks 1, 2, 3, 4, 5, 6 and 7. |
norm_par:banks_033bm.grp norm_par:sides_033bm.grp norm_par:mods_033bm.grp click here for full list of contents of each detector group |
15903 - 16504 | Banks 0, 1, 2, 3, 4, 5, 6 and 7. |
norm_par:banks_034m.grp norm_par:sides_034m.grp norm_par:mods_034m.grp click here for full list of contents of each detector group |
16505 - 23827 | Banks 0, 1, 2, 3, 4, 5, 6 and 7. |
norm_par:banks_051m.grp norm_par:sides_051m.grp norm_par:mods_051m.grp click here for full list of contents of each detector group |
23828 onwards | Banks 0, 1, 2, 3, 4, 5, 6 and 7. |
A groups file named BANKS*.GRP produces one group per bank.
A groups file named SIDES*.GRP groups together all detectors in a bank and on the same
side of the instrument.
A groups file named MODS*.GRP produces one group per module.
If the name of a groups file ends with the letter 'm' then it has been masked to exclude detector elements which have an unreliable calibration or are dead. This version of the groups file should be used, rather than the version without the 'm'.
If electronics spikes are present in the data then they should be dealt with before running NORM - see here.
Further general information about groups files is available here.
Further information about the GEM detector banks is available on the detector specification page and the GEM news page.
Last updated on 01 Jul 2005 by Alex Hannon (a.c.hannon@rl.ac.uk)